Lemon & Lime Tray Cutter and Slump Mold Set

Everything you need to make a lemon or lime shaped serving tray or dish from clay: a matching cutter and slump mold set.

Cut your rolled slab with the lemon/lime shaped cutter, then press the cut piece down onto the slump mold — since the mold is slightly smaller than the cutter, the edges gently rise up as you press, giving the piece a soft curved tray shape straight out of the box. The mold's edges are rounded, so the tray forms a smooth, gentle curve where the sides rise, rather than a sharp bend.

As with any 3D printed tool, faint layer lines can transfer onto the clay surface. These are easy to smooth away afterwards with a damp sponge or soft cloth, if you'd like a perfectly smooth finish.

How to use:

1. Roll out your clay slab and cut out the shape with the cutter.
2. Place the cut piece on top of a thick piece of foam.
3. Position the mold centered on top of the piece.
4. Press down firmly and evenly so the edges form up around the mold.

Available in two sizes:

• Regular: cutter approx. 208 x 142mm, mold approx. 180 x 120mm
• Large: cutter approx. 250 x 167mm, mold approx. 230 x 154mm

Perfect for polymer clay and ceramic projects.

3D-printed from PLA at Icewood Atelier's workshop in Finland.

Design by Icewood Atelier.

Not food safe.