Icewood Atelier
Poinsettia Clay Cutter – 3D Printed Christmas Flower Cutter | 100 mm & 150 mm
Poinsettia Clay Cutter – 3D Printed Christmas Flower Cutter | 100 mm & 150 mm
In stock
The listed dimensions are the size of the tool, i.e. the wet clay. Clay shrinks during drying and firing, usually around 5–15%, and the final size of your piece always depends on your own clay and firing temperature. For example, with a 10 cm size and 12% shrinkage, the finished piece would be about 8.8 cm. Please check your clay's shrinkage before ordering and choose the size accordingly.
Couldn't load pickup availability
Create a beautiful Christmas poinsettia from clay with this 3D-printed poinsettia cutter. ❄️ The five-leaf flower shape has softly wavy leaf edges and cuts cleanly through rolled clay or polymer clay.
Tip: For an especially beautiful flower, cut two shapes of the same size and layer them on top of each other so that the leaves sit in different positions. Finish the centre with small clay balls – perfect for Christmas ornaments, wall decorations, candle holders or a festive table centrepiece.
How to use: roll out your clay to an even thickness, press the cutter firmly straight down and lift. Gently push the shape out of the cutter if needed. Curve the leaves slightly while the clay is still soft for a more natural look.
Available in two sizes, 100 mm and 150 mm. 3D-printed from PLA at Icewood Atelier's workshop in Finland.
Not intended for food use.
Designed and made in Finland by Icewood Atelier.
⚠️ The product color may vary.
